A mudguard keeps road spray off the rider, but it sits close to a rotating wheel. If a twig or another object becomes trapped between the front tyre and the guard, the mounting can take a sudden load. In the worst case, the guard is pulled into the tyre and the front wheel locks.
Some full-length front mudguards use a safety release to reduce this risk. Under a heavy load, the stay connection separates from its mount on the fork, so the stay cannot keep pulling the guard toward the wheel. When choosing or fitting a mudguard, check whether such a mechanism is provided and installed correctly.
The mounting must suit the fork, and enough space should remain between tyre and guard even when the wheel moves slightly or dirt accumulates. SKS recommends about 1.5 centimetres of clearance. After fitting, spin the wheel by hand and check the gap all around, then confirm that the guard cannot touch the brakes.